200 Lime-Solv

200 Lime-Solv is a heavy-duty cleaner combination of organic and inorganic acids, wetting agents and inhibitors for use in the final clean-up of new masonry

• 200 Lime-Solv efficiently cleans off : residual mortar, job site soiling, staining, and efflorescence
• Lime-Solv will not discolor or damage the masonry surfaces
• Safer and more controllable than raw muriatic acid

FOR MASONRY TYPES:
Cleans red brick, other dark colored new masonry and concrete block not susceptible to metallic staining.

SIZES: 1, 5 & 55 Gallons

Lime-Solv Application

• Thoroughly prewet material to be cleaned.
• Apply diluted 200 with a dense, soft masonry brush or low pressure (40-50 psi) airless sprayer.
• Scrape off excess mortar and reapply if needed.
• Thoroughly rinse with fresh water.
• Suggested Dilution Rates for 200 Lime-Solv

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Concrete and Clay Block	4 parts water
Hard-Burned Pink, Salmon & Tan Brick	6 parts water
Exposed Aggregate Concrete	6 parts water
Structural Tile (Unglazed)	6 parts water
Sandstone, Ohio Bluestone, Other Porous Stone	8 parts water (if metallic stains are present prior to testing or appear afterwards, use 202V Vana-Stop)
Specialty Pre-Faced Concrete Block & Tile	8 parts water
Smooth Finished Precast & Cast In Place Concrete	10 parts water
Structural & Ceramic Glazed Tile & Brick	10-12 parts water
Burnished Masonry	Use Diedrich 222 Concrete Brick & Burnished Masonry Cleanser
Metallic Stains/Discolorations	If metallic stains are present prior to testing or appear afterwards, do not use 200 Lime-Solv – use 202V Vana-Stop

• Download the Technical Data Sheet for this product for detailed instructions
• Typical Coverage Rates: 150-200 sq. ft. per gal.