222 Concrete Brick & Burnished Masonry Cleanser

Specially formulated Non-Etching cleanser safe for textured and pigmented masonry and mortar surfaces, custom masonry and colored mortar.

• Non-etching
• Also removes mortar smears, rust and mud stains, and atmospheric dirt without affecting the texture of the surface
• Enhances colors and brightens white substrates and exposed aggregate

FOR MASONRY TYPES:
Concrete Brick, Burnished Masonry, Custom Masonry, Architectural Pigmented Concrete Surfaces, and Colored Mortar

SIZES: 1, 5 & 55 Gallons

Concrete Brick & Burnished Masonry Cleanser Application

• Thoroughly pre-wet entire surface with water to prevent streaking.
• Apply saturating application of dilulted 222 by brush, roller or low-pressure sprayer.
• Allow product to dwell until stains disappear (about 3 to 5 minutes).
• Reapply cleaner and remove with pressure washer.
• Neutralize interior surfaces with a mix of 1 gallon water to 2 oz. ammonia and rinse again.
• Suggested Dilution Rates for 222 Concrete Brick & Burnished Masonry Cleanser

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Exposed Aggregate/Removal of Retarder, Efflorescence, etc.	2 parts water
Burnished/Custom Masonry, Concrete Brick, Slump Brick	3 parts water

• Download the Technical Data Sheet for this product for detailed instructions
• Typical Coverage Rates: 150-200 sq. ft. per gal.