202V Vana-Stop New Masonry

202V Vana-Stop New Masonry Cleaner is specifically formulated for cleaning new masonry susceptible to vanadium, manganese, molybdenum and other metallic stains. 202V Vana-Stop is a productive combination of organic and inorganic acids, wetting agents and inhibitors for use in the professional clean up of new masonry.

• Efficiently cleans off residual mortar, efflorescence, job site soiling and staining.
• Clean with this product to greatly reduce the likelihood of a staining occurrence and eliminate costly recleaning and stain removal expenses.
• Does not discolor or damage surfaces, safer and more controllable than raw muriatic acid.

FOR MASONRY TYPES:
Soft burned white, gray or brown and all other brick, natural stone, tile, exposed aggregate and several varieties of new masonry construction susceptible to metallic staining - contact us for details.

SIZES: 1, 5 & 55 Gallons

Vana-Stop New Masonry Cleaner Application

• Thoroughly prewet masonry to be cleaned
• Apply diluted 202V with a dense, soft masonry brush or low pressure (40-50 psi) airless sprayer.
• Suggested Dilution Rates
  for 202V Vana-Stop

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Black, White, Grey, Tan & Chocolate Faced Brick; Limestone; Unglazed Structural Tile; Precast & Exposed Aggregate	6 parts water
Colored Concrete Masonry Units	10-15 parts water
Sandstone, Ohio Bluestone, Other Porous Stone	8 parts water
Glazed Structural & Ceramic Tile, Ceramic Brick	10 parts water
Burnished Masonry	Use Diedrich 222 Concrete Brick & Burnished Masonry Cleanser

• Download the Technical Data Sheet for this product (right column) for detailed instructions
• Typical Coverage Rates: 150-200 sq. ft. per gal.

For the containment and neutralization of this and other Diedrich products: Neutra Soak, a dry absorbent product environmental protection system