ENVIRESTORE 100™

Perfect for the environmentally conscious architect and historic preservationist who want to eliminate harsh acids.

• Citric based gentle restoration cleaner – safer, environmentally friendly, now made more effective and blended slightly stronger to take on a wider variety of surfaces
• ENVIRESTORE 100™ depends on the action of citric and phosphoric acid for its results rather than harsh mineral acids, making it a milder product that poses fewer hazards to workers and the environment
• The product will not over-clean brick and stone
• Product is ideal for maintenance cleaning of dirt streaks and stains in strip malls, commercial centers, and home DIY use.

FOR MASONRY TYPES:
Brick, Sandstone, Unpolished Granite, and Terra Ccotta

SIZES: 1, 5 & 55 Gallons

ENVIRESTORE Application

• Apply at dilution rate up to 3 parts water to 1 part ENVIRESTORE 100™ to a prewetted surface with a dense, soft masonry brush, roll, or low pressure (40-50 psi) airless sprayer.
• Allow to dwell for 3 minutes.
• Rinse with a pressure washer.
• Further applications may be required to achieve desired results.
• Suggested Dilution Rates for ENVIRESTORE 100™

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Brick, Sandstone, Unpolished Granite, and Terra Cotta (lightly soilded)	3 parts water

• Download the Technical Data Sheet for this product for detailed instructions
• Typical Coverage Rates: 150-200 sq. ft. per gal.